• Double Rotary Tablet Presses

These machines are Double sided Rotary Tableting Presses offered in 27, 35, 39 and 45 station configurations. Ruggedly built with prime materials, these machines like all other GPMC products are workhorses.

* Technical Specifications for Double Rotary Tablet Presses
Models	0437	0438	0439	0440
Number of Stations	27 Stns.	33 Stns.	39 Stns.	45 Stns.
Output min / min	750 Tab.	500 Tab.	1000 Tab.	1500 Tab.
Output max / max	1550 Tab.	1800 Tab.	2000 Tab.	3000 Tab.
Max. Comp. Force	6.5	6.5	6.5	6.5
Comp. Journals	2	2	2	2
Max. Tab. Dia.	15.5 mm	13 mm	11.1 mm	11.1 mm
Max. Depth of Fill	17.5 mm	17.5 mm	17.5 mm	17.5 mm
Dia. of Punches	19 mm	19 mm	19 mm	19 mm
Dia. of Dies	30.16 mm	30.16 mm	24.00 mm	24.00 mm
Type of Tooling	Mini 'B' Series	Mini 'B' Series	Mini 'B' Series	Mini 'B' Series
Power Reqd.	3 HP 440V 50 Cyls. 3PH	3 HP 440V 50 Cyls. 3PH	3 HP 440V 50 Cyls. 3 PH	3 HP 440V 50 Cyls. 3PH
Discharge	Both Side	Both Side	Both Side	Both Side
Dimensions	940 x 940 x 1675 mm	940 x 940 x 1675 mm	940 x 940 x 1675 mm	940 x 940 x 1675 mm
Net. Wt.	1200 Kgs.	1200 Kgs.	1200 Kgs.	1200 Kgs.

• EXCELLA

These are Rotary Tableting Machine having various Configurations of stations and Compression Journals. The Machine is capable of Compressing comparatively larger tablets at high compression forces and at a high rate of production.

* Technical Specifications for EXCELLA
Models	EXCELLA 2000	EXCELLA 2700	EXCELLA 3500
Number of Stations	20 Stns.	27 Stns.	35 Stns.
Output min / min	400 Tab.	750 Tab.	900 Tab.
Output max / max	90 Tab.	1500 Tab.	2800 Tab.
Max. Comp. Force	10 Tons	10 Tons	8.5 Tons
Journals	Single Compression	1 Pre-Compression 1 Main-Compression	Double Compressions
Max. Tab. Dia.	24 mm	23 mm	16 mm
Max. Depth of Field	19 mm	20 mm	19 mm
Dia. of Punches	23.35 mm	25.35 mm	19 mm
Dia. of Dies	38.1 mm	38.1 mm	30.16 mm
Type of Tooling	'D' Series	'D' Series	'D' Series
Power Reqd.	440V, 3 PH, 2 HP	440V, 3 PH, 5 HP	440V, 3 PH, 3 HP
Upper Punch Penetration	Adjust upto 5 mm.	Adjust upto 5 mm.	Adjust upto 5 mm.
Discharge	One Side	One Side	One Side
Dimensions	750 x 750 x 1400 mm	940 x 940 x 1650 mm	940 x 940 x 1650 mm
Net. Wt.	1 Ton.	1 Ton.	1 Ton.

• Punches & Dies

The Punches and Dies from General Pharmaceutical Machinery Company have today carved out a select market for themselves internationally as well as domestically. Being the first company in India, to manufacture Punches and Dies GPMC has many firsts to its credit. Punches and Dies are Manufactured after proper selection of work conditions, life expectancy and corresponding design, material selection ,heat and process of manufacture. No Punch set leaves our premises without treatment subjection to quality checks. GPMC has the largest man hour experience in the field of punches and dies.

• GMP Roll Compactor

1. Purely GMP model, which means that all the drives are separated from the working chamber. Full stainless steel covers and fully stainless steel working chamber. The working chamber is covered by acrylic doors on three sides with the back side (fourth side) of stainless steel. Drive Chamber is totally separated from compaction area, so that contamination with the material is totally eliminated.
2. Extra reduction gearbox is involved which equally transfers torque to the roller shafts. Special couplings that take care of the flexible roller and uniformly deliver torque from the gearbox.
3. A/C frequency variator is used to steplessly vary the speed of the Auger. Machines controlled by PLC have A/C frequency variator to set speeds of the rollers.
4. In built torque limiter coupling that provides safety to the machine helps the auger to slip comfortably in case of overfeeding.
5. Provides very clean Environment as special roller encasement is provided which reduces dusting in the working chamber to near zero level.
6. The hydraulic system facilitates the easy lifting of Auger assembly for cleaning and repeated accuracy in Pressure setting.
   

* Technical Specifications for Roll Compactor
Models	V&K 200/50	V&K 200/115	V&K 250/150	V&K 300/150
Estimated Production Rate	50 kgs./hr.	100 - 120 kgs./hr.	185 - 200 kgs./hr.	250 - 300
R.P.M. of Augar	20 - 60	20 - 60	40 - 80	40 - 80
Infinitely variable by AC Frequency Variator
R.P.M. for Rollers	11	11	8, 12, 16 by Steps Pulley	8, 12, 16 by Steps Pulley
Power Pack Capacity	200 kgs./sq.cm.	250 kgs./sq.cm.	300 kgs./sq.cm.	350 kgs./sq.cm.
HP for Augar	3 HP	5 HP	7.5 HP	10 HP
HP for Roller	5 HP	10 HP	15 HP	20 HP
Net Wt.	950 kgs.	1700 kgs.	2500 kgs.	3000 kgs.
Overall Dimensions	1300 x 1100 x 1600 mm.	1650 x 1500 x 1800 mm.	2000 x 1850 x 2000 mm.	2500 x 2200 x 2200 mm.
Drive Unit	Gear Box 4NU	Gear Box 6NU	Gear Box 8NU	Gear Box 10NU
Roller Size	OD-200 x 50(W)	OD-200 x 115(W)	OD-250 x 150(W)	OD-300 x 150(W)
Chilled Water Circulation	Provided	Provided	Provided	Provided
Production Rates depend upon Densities & Compactibility of Materials

* All Dimensions Listed above reflect average values based on a typical Machine layout. Actual Figures may vary depending upon the average final machine Configuration. Performamce Specifications are Based on theoretical Data. Owing to On-Going improvement Specifications and materials are subject to change without prior notice.